Price: -
TS10-Titanium
The TS10 is a powerful Mini EDC flashlight. It uses 3 pieces main LEDs and 3 peices real RGB Aux LEDs to provide ,with Anduril 2.0 and powered by one 14500 battery. It will be your reliable partner for every day use and with fun.
Specifications
☀Emitter: 3 pieces 90 CRI CSP LEDs and RGB Aux CSP 4000K or 6000-6500K
☀Battery options: 1x 14500 Li-Ion battery
☀Operating voltage: 3.0V - 4.2V (14500 battery)
☀Dimension: 71.5 mm (length) × 21mm (head diameter)
☀Weight: 55 ± 1 grams (without battery)
☀Anduril2 User Interface
☀flashlight body: Aerospace grade Titanium alloy, CNC manufactured to hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
Automatic Stepdown: Turbo mode steps down to High mode automatically to prevent overheating.
Electronic reverse polarity protection from improper battery installation
Advanced Temperature Regulation (ATR)
☀technology: As the temperature rises, TS10 is programmed to automatically step down and step up the brightness to prevent overheating.
OUTPUT（Advance UI）
Mode H1:（1lm）Beam distance：4.5 meters Intensity (cd)：5
Mode H2:（10lm）Beam distance：12 meters Intensity (cd)：45
Mode H3:（50lm）Runtime：6h43min Beam distance：25 meters Intensity (cd)：160
Mode H4:（130lm）Runtime：2h43min Beam distance：40 meters Intensity (cd)：400
Mode H5:（300lm）Runtime：1h24min Beam distance：55 meters Intensity (cd)：800
Mode H6:（580lm）Runtime：1h20min Beam distance：80 meters Intensity (cd)：1675
Mode H7:（900lm）Runtime：1h10min Beam distance：100 meters Intensity (cd)：2525
Mode H8:（1400lm）Runtime：1h Beam distance：130 meters Intensity (cd)：4150
Operation Instructions
Quick Start
After putting a battery in the light and tightening the parts together, the light should quickly blink once to confirm it has power and is now operational. After that, basic usage is simple:
Click to turn the light on or another click to turn it off.
- Hold the button to change brightness.
- Release and hold again to change brightness the other way.
That is all the user needs to know for basic use, but there are many more modes and features available for people who want more.
Before reading the rest of this manual, it is recommended that users look at the Anduril UI diagram(s), which should be provided along with the flashlight.
Button presses
Button presses are abbreviated using a simple notation:
- 1C: One click. Press and then quickly release the button.
- 1H: Hold. Press the button, but keep holding it.
- 2C: Two clicks. Press and release quickly, twice.
- 2H: Click, hold. Click two times, but hold the second press.
- 3C: Three clicks. Press and release quickly, three times.
- 3H: Click, click, hold. Click three times, but hold the final press.
The same pattern is used with higher numbers too. For example, 10C means ten clicks... and 10H means ten clicks but hold the final press.
Simple UI Diagram Not everything is covered in the diagram, please read the text.
Simple UI
By default, the light uses a simple UI. This is useful if you lend the light to someone else, or if you just don't want to bother with any crazy disco modes.
Simple UI has all the basic functions needed to work as a flashlight, but the minimum and
maximum brightness are limited to make it safer, and any complex or advanced functions are blocked.
Functions available in Simple UI include:
- 1C: On / off
- 1H: Ramp up (or down, if button was released less than a second ago)
- 2H: If light is on : ramp down
If light is off: momentary high mode
- 2C: Double click to go to / from highest safe level
- 4C: Lockout mode.
Some other modes and functions are available too. When the light is off, these are the options:
- 3C: Battery check mode. (displays voltage once, then turns off)
- 4C: Lockout mode.
- 10H: Switch to Advanced UI.
- 15C or more: Version check.
In Lockout mode with Simple UI, there are a few functions:
- 1H: Momentary moon
- 2H: Momentary low
- 4C: Unlock and turn on
- 4H: Unlock and turn on at low level
- 5C: Unlock and turn on at high level
To change between Simple UI and Advanced UI, turn the light off and then do one of these:
In Simple UI:
- 10H: Go to Advanced UI.
In Advanced UI:
- 10C: Go to Simple UI.
- 10H: Configure Simple UI.
If you get lost, or if you want to auto-calibrate the temperature sensor, do a Factory Reset. The process for this is:
- Loosen body tube
- Hold button
- Tighten body tube
- Keep holding button for about 4s
The light should flicker while getting brighter, then briefly burst to full power. Hold until it reaches full power to do a reset, or let go of the button early to abort.
Advanced UI
Advanced UI has all the advanced functions which are fun to play with but also hard to learn. Please refer the UI diagram below. Please ask us for pdf file so you can ready easily. We can also send video link to show how to play with Anduril2
FAQ
Q: Who We Are?
A: We are Wurkkos Official Store. Our vision is to become the professional flashlight manufacturer and seller by providing an unparalleled selection of the very best flashlights and accessories, an unbeatable shopping experience, prompt shipping and exceptional customer service that exceeds expectation.
Q:About Shipping
A: Generally most of our products are in stock,your order will be shipped out within 1-3 workdays after your payment is verified by Aliexpress.But in case of any hot products are temporarily out of stock, we will contact you asap to ask an extension or change other items or any of your suggestion.
Q:About Qroduct Quality
A: Our products are made of aluminum alloy material and are manufactured through multiple high-quality processing techniques. The product has a long service life and is not easy to scratch.
Q:About customized products and drop-shipping
A: We provide product customization services and drop-shipping, welcome to contact us through the AliExpress platform, we will give you a satisfactory quotation.
Q:About Feedback
Reviews
There are no reviews yet.